-40%
Motul 8100 X-CLEAN 5W40 100% Synthetic Performance Engine Oil 5 Liter 102051 x2

Motul 8100 X-CLEAN 5W40 100% Synthetic Performance Engine Oil 5 Liter 102051 x2

$ 42.21

Availability: 81 in stock
  • Restocking Fee: No
  • Return shipping will be paid by: Seller
  • Returns Accepted: Returns Accepted
  • Condition: New
  • Manufacturer Part Number: 102051 x2
  • Item must be returned within: 30 Days
  • Refund will be given as: Money Back
  • Brand: MOTUL

    Description

    Motul 8100 X-CLEAN 5W40 100% Synthetic Performance Engine Oil (5 Liter)
    Part #
    102051
    x2
    This sale is for 2 x 5L bottles Motul 8100 X-Clean C3 5W-40 100% Synthetic.
    TYPE OF USE
    Lubricant specially designed for last generation cars, powered by turbo Diesel direct injection or gasoline engines, EURO IV emission regulation compliant, requiring an ACEA C3 engine oil, high HTHS (> 3.5 mPa.s) viscosity and "Mid SAPS" with reduced content of suphated ash (= 0.8%), phosphorus (0.07 = x = 0.09%) and sulphur (= 0.3%). Suitable for any type of Diesel or gasoline engines calling for ACEA A3/B3 or A3/B4 lubricants.
    ATTENTION :
    For BMW vehicles, this product can be used for gasoline engines
    only
    in European Union countries, Switzerland, Norway and Liechtenstein. Refer to BMW recommendation.
    STANDARDS & APPROVALS:
    ACEA C3, API SN/CF, BMW LL-04, MB 229.51, VW 502.00/505.01/505.00, Porsche A40, Ford M2C 917A, Dexos2
    RECOMMENDATIONS Renault/Nissan – Fiat – Kia – Suzuki – Ssangyong…
    Engines compliant with EURO IV emission regulation are fitted with sensitive exhaust gas after treatment systems :
    Sulphur and Phosphorus inhibit catalytic convertors operation and can damage catalytic components : inefficient exhaust gas treatment.
    Sulphated Ashes clog diesel particulate filters : shorten regenerating cycle, higher fuel consumption and engine power loss.
    ACEA developed ACEA C3 standard for lubricants with high HTHS (> 3.5 mPa.s), reduced Sulphated Ash, Phosphorus and Sulphur content (Mid SAPS), suitable for use with exhaust gas after treatment systems.
    ACEA C3 lubricants achieve extended drain intervals managed by vehicles computer on board.
    PROPERTIES
    Viscosity grade SAE J 300 5W-40
    Density at 20°C (68°F) ASTM D1298 0,850
    Viscosity at 100°C (212°F) ASTM D445 13.9 mm²/s
    Viscosity at 40°C (104°F) ASTM D445 83.4 mm²/s
    Viscosity index ASTM D2270 171
    Pour point ASTM D97 -39°C / -38°F
    Flash point ASTM D92 230°C / 446°F
    TBN ASTM D 2896 7.9 mg KOH/g