APS film adapter for ION, JUMBL, Wolverine, Digitnow!, Magnasonic scanners

Description

Visit My eBay Store: Negative Solutions
This is an APS film format negative holder for use with the ION, JUMBL, Wolverine, Digitnow!, Magnasonic + more scanners (Patent Pending).
See below for full compatibility list.  This was CAD designed and manufactured for use with the obsolete APS film format that was briefly popular in the 1990s.
Unfortunately not only is it almost impossible to get prints made from APS film these days, but APS negative holders are hard to come by and the ones that you can find cost upwards of 0.  Additionally, while many film scanners allow for negatives to be scanned directly on the glass, APS presents a special issue because it's stored wound tightly inside the film canister.  Once you get it out of the canister, the negatives roll in to a ball unmercifully without something to hold them flat.  Removing exposed negatives from an APS canister is actually quite easy.  You literally break it out any way you can.  Since APS canisters are plastic, I use a pair of pliers to
gently
crack open the canister to gain access to the negatives.  If you don't want to destroy your APS canister, there are commercially available products known as "film retrieval tools" that will work for APS.  I am also told that it is possible to use a small flat screwdriver to open the canister film door and then use the screwdriver to turn the canister center spindle to make the film eject for scanning.
Specifications for the APS negative holder:
Overall: 217 x 64 mm
Material:  plastic
Assembled thickness:  6.3 mm
Features:  Unlike some designs, this holder features a recessed channel to hold your negative strip firmly which can help avoid scratches or trapped dust that other holders may cause.
Full Compatibility List:
ION PIC2SD (NOT PIC2SD Plus)
ZONOZ FS-ONE
FS-THREE
Wolverine SNAP-14 Red
Wolverine SNAP20
Wolverine SNaP100 Red
Wolverine F2D Super Green
Wolverine F2D Super Yellow
Wolverine F2D8 Red
Wolverine F2D100 Black
Wolverine F2D Red
Wolverine F2D20 Red/Orange
Wolverine F2D30 Blue
Wolverine F2D Mighty White
Wolverine F2D Mighty Orange
Wolverine F2D14 Green
Jumbl 22MP
Digitnow! 22MP
Digitnow! 5MP
DigitNow! M125
DigitNow! M123
ClearClick 20MP
ClearClick 22MP
ClearClick F2USB-05
Rollei DF-S
Magnasonic 22MP
SainSonic FS-02 35mm Slide Converters
SPECIAL NOTE FOR INTERNATIONAL BUYERS
:  Ebay has recently changed rules for international buyers.  If you are buying multiple items from the same seller you can no longer combine shipping.  Ebay will also require you to pay immediately so I am not able to send you an invoice for combined shipping.  Unless something changes (or unless you know of a way to combine shipping that I haven't found yet), your only option is to buy and pay for each item separately.  This will likely result in overpayment of shipping charges.  I always refund overpayment of combined shipping charges, but unfortunately Ebay charges sellers a 10% commission on the original shipping charge and will not refund the difference.  I will continue to refund overpayment of shipping on multiple items, but in the future I will have to deduct the 10% commission that Ebay sticks me with.  I apologize for the inconvenience.  Hopefully Ebay will change this practice soon!
Satisfaction is guaranteed!
Visit My eBay Store: Negative Solutions
Important additional notes:
- If you are buying my holders for resale, please be aware that my products are more about "function" over "form."  This is why they are so inexpensive compared to other commercially produced options.  Each holder is custom made and may contain spot sanding and other finishing marks.  I do my best to clean my products up cosmetically, but due to sales volume I simply can't spend a lot of time on it.  My main concern is that it works like it is supposed to.  As a result, if you are reselling please be aware that you may need to do some more finishing work suitable for a retail environment.
- Please pay particular attention to the "handling" days before shipping as noted above.  I do not typically maintain an inventory of my film holders as most are custom made upon order placement.  As such, I ask for 5 business days handling before shipping.  My average is likely around 2 days, but there are occasions where orders are very high and I may need all 5 business days before I am able to ship your holder.  Please keep this in mind.